Avocent Network Adapter EMS1000P Podręcznik Użytkownika Pobierz pdf (Strona 71)

Select DSView Settings - Dial-up - PPP Password, then enter and confirm the password needed to access the

ACS 6000 console server.

Select DSView Settings - Dial-up - IP Addresses.

Click Generate Automatically to set the IP address automatically, or enter the PPP Local IP address and

Appliance IP address manually.

Select DSView Settings - Dial-up and click Save.

To configure a console server to receive the dial-up connection within the DSView 3 software:

In a Units view window containing appliances, select the ACS 6000 console server you want to configure.

For a modem attached to a serial port, select Ports - Serial Ports, then select the port that contains the attached

modem. Click Set Dial-In.

-or-

For a modem attached to an auxiliary port, select Ports - Auxiliary Ports, then select the port. Click Set Dial-In.

-or-

For an internal modem, select Ports - Auxiliary Ports and select the modem.

-or-

For a pluggable device modem, select Pluggable Devices, select the modem and click Save.

Select DSView Settings - Dial-up and click Push Configuration.

The following step is only required if CHAP was selected in the PPP Auth Protocol field in the DSView 3

software Settings Dial-up window.

format, where the first column should have the PPP user and the third column should have the PPP password as

is shown in the following example:

pppuser * "ppppassword" *

Appendices 63

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 79 80

Brak uwag

Avocent Network Adapter EMS1000P Podręcznik Użytkownika Strona 71