Avocent Cyclades CS Podręcznik Użytkownika

Przeglądaj online lub pobierz Podręcznik Użytkownika dla Networking Avocent Cyclades CS. Avocent Cyclades CS User guide Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj

Podsumowanie treści

Strona 1 - Command Reference Guide

Avocent® ACS6000 Advanced Console ServerCommand Reference Guide

Strona 2

6...Avocent® ACS6000 Advanced Console ServerCommand Line SyntaxNOTE: Square brackets ([]) denote an optional element. Each element is separated by

Strona 3 - TABLE OF CONTENTS

Introduction, Navigation and Commands...7

Strona 4

Introduction, Navigation and Commands...8

Strona 5

CLI Command SetCommands Used for the CLIThis chapter describes the general commands used when accessing the console server with thecommand line interf

Strona 6

10...Avocent® ACS6000 Advanced Console ServeraddAdd a node.Syntax:--:- / cli-> add <Path>Example:--:- / cli-> add network/hosts--:#- [h

Strona 7 - CLINavigation

CLI Command Set...11Example:--:- access cli-> cd /Moves to the top level and displays the following:--:- / cli->Example:--:- access cli-> c

Strona 8 - Tab><Tab>

12...Avocent® ACS6000 Advanced Console ServerType the hotkey to suspend the connection:Ctrl + zNOTE: The connect, sniff and share commands allow yo

Strona 9 - Parameters

CLI Command Set...13-or-Type the hotkey to suspend the connection:Ctrl + zdisconnectUse the text session hot key to suspend the target session and r

Strona 10 - Command Line Syntax

14...Avocent® ACS6000 Advanced Console ServersetSet a parameter.Syntax:--:- / cli-> set <Path> <Parameter>=<Value>After a para

Strona 11

CLI Command Set...15lsShow the available directories or subnodes at the current location.Syntax:--:- / cli-> lsExample:--:- / cli-> ls authent

Strona 12

Emerson, Emerson Network Power and the Emerson Network Power logo are trademarks or service marks of Emerson ElectricCo. Avocent, the Avocent logo and

Strona 13 - CLI Command Set

16...Avocent® ACS6000 Advanced Console Server--:- eth0 cli-> list_configurationecho offcd /network/devices/eth0batch_modeset status=enabledset i

Strona 14

CLI Command Set...17--:- / cli-> cd access/<PDU_ID>2. Launch the power command with a specific outlet (number or name), range of outlets (u

Strona 15

18...Avocent® ACS6000 Advanced Console ServerNOTE: Use this command to restart the sequence number.Syntax:--:- / cli-> opiepasswd -f -c <user

Strona 16 - Ctrl + z

CLI Command Set...19list_shared_sessionList the users connected to the shared serial port.Syntax:--:- <serial_port_ID> cli-> list_shared_se

Strona 17

20...Avocent® ACS6000 Advanced Console Server--:- / cli -> show_appliance_databufThe following commands are available for show data buffering:•

Strona 18

CLI Command Set...21--:- settings cli-> showhostname = ACS6048primary_dns = 110.126.129.4secondary_dns =domain = corp.tst.comenable_ipv6 = noenab

Strona 19

CLI Command Set...22

Strona 20

Port Access and Configuration ExamplesBy default, all serial ports and the AUX/Modem port are disabled. An administrator must enableand configure the

Strona 21

24...Avocent® ACS6000 Advanced Console ServerField DescriptionFor ApplianceName Name assigned to the appliance (for example, ACS6048-1357908642)Por

Strona 22

Port Access and Configuration Examples...25--:- access cli->lsACS6016-0011223344/21-67-72-p-1/21-67-72-p-2/21-67-72-p-4/myPDU/Type show to see th

Strona 23 - CLI Command Set...19

iTABLE OF CONTENTSIntroduction, Navigation and Commands1Access Options and How to Log Into the CLI2Configuration Tasks Performed With the CLI3CLINavi

Strona 24 - Selection

26...Avocent® ACS6000 Advanced Console Serverfremont-techpubs login: fredPassword:Last login: Tue Oct 2 13:09:04 2007 on :0Linux fremont-techpubs 2

Strona 25

Port Access and Configuration Examples...27Manage Power for a Device Connected to an Outlet on aPDUSee cycle, on, off, lock and unlock on page 16 fo

Strona 26 - CLI Command Set...22

28...Avocent® ACS6000 Advanced Console Server--:#- [serial_ports/physical] cli->4. Enter set status=enabled, then enter show and save as shown t

Strona 27 - Connected Devices

Port Access and Configuration Examples...294 ttys4 21-67-72-p-4 cas 9600_8N1_telnet-ssh_local5 ttys5 21-67-72-p-5 cas 9600_8N1_telnet-ssh_local6 tty

Strona 28 - Access Parameters

Port Access and Configuration Examples...30

Strona 29

CLI Overview for AdministratorsThis chapter describes using the Command Line Interface (CLI) for administrators. Onlyadministrators and authorized use

Strona 30

32...Avocent® ACS6000 Advanced Console ServerSystem Navigation Treeidle_timeout =rpc =port access =session =port_access_kill_multi_session =port_ac

Strona 31 - Port Configuration Examples

CLI Overview for Administrators...33Date and Time Navigation Treedate_and_timedate_and_timesettings=day=hour=minute=month=second=year=time_zone=Date

Strona 32

34...Avocent® ACS6000 Advanced Console Server--:- / cli-> cd system/generalTo set the login banner:1. Enter the following command.--:- / cli>

Strona 33

CLI Overview for Administrators...35System/UsageEnter cd system/usage to navigate to the Usage level.--:- / cli> cd system/usage/Usage Navigation

Strona 34

ii...Avocent® ACS6000 Advanced Console ServerAccessing Serial Ports using ts_menu26Manage Power for a Device Connected to an Outlet on a PDU27Port

Strona 35 - System/Security

36...Avocent® ACS6000 Advanced Console ServerNetwork Navigation Treeprimary_dns=secondary_dns=enable_ipv6=get_dns_from_dhcpv6=get_domain_from_dhcpv

Strona 36 - System/Date and Time

CLI Overview for Administrators...373. Enter set ipv<4|6>_address=<IP_Address> ipv<4|6>_mask=<netmask> to set the IPaddress

Strona 37 - System/General

38...Avocent® ACS6000 Advanced Console Server--:#- [hosts] cli->4. Enter set hostname=<hostname> ip=<IP_address> to add the name of

Strona 38 - System/Information

CLI Overview for Administrators...39Network/FirewallEnter cd network/firewall to navigate to the firewall level.--:- / cli-> cd network/firewallN

Strona 39 - Network/Settings

40...Avocent® ACS6000 Advanced Console ServerWiz commandThe wiz command allows administrators to easily and quickly perform the initial networkconf

Strona 40 - Network/Devices

CLI Overview for Administrators...41Other hints:- Use backslash '\' to escape spaces, '\' and other controlcharacters when assig

Strona 41 - Network/Hosts

42...Avocent® ACS6000 Advanced Console ServerPorts Navigation Treepool_members=dial-in_profilesecure_dial-incallback_userssettingslog_in_to_applian

Strona 42

CLI Overview for Administrators...43enable_cisco_rj45_pin-out = nostatus = enabledspeed = 9600parity = nonedata_bits = 8stop_bits = 1flow_control =

Strona 43 - Network/SNMP

44...Avocent® ACS6000 Advanced Console ServerIf no internal modem is installed, the port name is ttyA1. If an internal modem is installed, the port

Strona 44 - Wiz command

CLI Overview for Administrators...45UsersEnter cd users to navigate to the users level.--:- / cli-> cd usersUsers Navigation Treelocal_accountsus

Strona 45 - Ports Options

Introduction, Navigation and CommandsThe Avocent® ACS 6000 advanced console server is a 1U appliance that serves as a single pointfor access and admin

Strona 46 - Serial Port Commands

46...Avocent® ACS6000 Advanced Console ServerEvents_and_Logs Navigation Treeevent listevent destinationssyslogsnmp trapsmsemaildsviewtrap_forwardda

Strona 47 - Auxiliary ports

CLI Overview for Administrators...47Option Descriptionpdusshow up in the PDUs node when they are discovered. Only power control opearation is suppor

Strona 48 - Authentication

48...Avocent® ACS6000 Advanced Console Server--:- / cli-> cd active_sessions--:- active_sessions cli->2. Enter show. Information displays as

Strona 49 - Events_and_Logs

AppendicesEnabling Firmware Upgrades When the Boot Image is notin FlashTo enable firmware upgrades when the boot image is not in Flash:1. Connect to t

Strona 51 - Active Sessions Information

...51Migration CLIThe Migration CLI is a tool that allows you to configure an ACS 6000 console server that is runningscripts based in the ACS advanc

Strona 52

52...Avocent® ACS6000 Advanced Console ServerCommand Value or Descriptionsbackupconfigsaveto sdN/AupgradefwcheckumN/Aapplicationconnect N/Apm N/Avi

Strona 53 - Appendices

...53Command Value or Descriptionsprotocol bidirectionaltelnet, consoleraw, cslip, local, rawsocket, slip, sshv1, sshv2, telnetconfig physicalports

Strona 54 - Appendices...50

54...Avocent® ACS6000 Advanced Console Server

Strona 55 - Migration CLI

...55Su and Sudo CommandsThe su and sudo commands allow a user to execute commands as a different user.Su commandUsing the su (switch user) command,

Strona 56

2...Avocent® ACS6000 Advanced Console ServerNumber Description1Serial Port 1.Serial ports are also referred to with tty device names, such as ttSy1

Strona 57

56...Avocent® ACS6000 Advanced Console Server# groups <username>To delete a member from the wheel group:1. Edit the file /etc/group.2. Remove

Strona 58

...57PARTTIMERS ALL = SHUTDOWN, REBOOTIn the preceding example, the users millert, mikef and dowdy can execute the kill, shutdown, rebootand su comm

Strona 60 - Sudo command

...59Technical SupportOur Technical Support staff is ready to assist you with any installation or operational issues youencounter with your Avocent

Strona 62

About Emerson Network PowerEmerson Network Power, a business of Emerson (NYSE:EMR), delivers software, hardware and services that maximizeavailability

Strona 63 - Technical Support

Introduction, Navigation and Commands...3NOTE: The default password for admin is avocent and for root is linux. The password for these users mayhave

Strona 64

4...Avocent® ACS6000 Advanced Console ServerAt any CLI prompt at any level, if you type cd and press Tab Tab, the navigation options (pathelements)

Strona 65 - About Emerson Network Power

Introduction, Navigation and Commands...5---:- system_tools cli->If you know the path, you can enter multiple path elements in a single command s

Komentarze do niniejszej Instrukcji

Brak uwag